Another example is the flow of air over an aircraft wing.

The flow profile of laminar flow in a tube can be calculated by dividing the flow into thin cylindrical elements and applying the viscous force to them. In that case, the velocity of flow varies from zero at the walls to a maximum along the cross-sectional centre of the vessel.

A common application of laminar flow is in the smooth flow of a viscous liquid through a tube or pipe.

In the case of a moving plate in a liquid, it is found that there is a layer (lamina) that moves with the plate, and a layer of stationary liquid next to any stationary plate.

As with flow in pipes, laminar flow typically occurs with lower Reynolds numbers, while turbulent flow and related phenomena, such as vortex shedding, occur with higher Reynolds numbers. The particle Reynolds number Re p would be used for particle suspended in flowing fluids, for example. įor fluid systems occurring on external surfaces, such as flow past objects suspended in the fluid, other definitions for Reynolds numbers can be used to predict the type of flow around the object. s)) ν is the kinematic viscosity of the fluid, ν = μ / ρ (m 2/s) ρ is the density of the fluid (kg/m 3).įor such systems, laminar flow occurs when the Reynolds number is below a critical value of approximately 2,040, though the transition range is typically between 1,800 and 2,100.R e = ρ u D H μ = u D H ν = Q D H ν A, ĭ H is the hydraulic diameter of the pipe (m) Q is the volumetric flow rate (m 3/s) A is the pipe's cross-sectional area (m 2) u is the mean speed of the fluid ( SI units: m/s) μ is the dynamic viscosity of the fluid (Pa The common example is flow through a pipe, where the Reynolds number is defined as The specific calculation of the Reynolds number, and the values where laminar flow occurs, will depend on the geometry of the flow system and flow pattern. If the Reynolds number is very small, much less than 1, then the fluid will exhibit Stokes, or creeping, flow, where the viscous forces of the fluid dominate the inertial forces.

As the Reynolds number increases, such as by increasing the flow rate of the fluid, the flow will transition from laminar to turbulent flow at a specific range of Reynolds numbers, the laminar–turbulent transition range depending on small disturbance levels in the fluid or imperfections in the flow system. Laminar flow generally occurs when the fluid is moving slowly or the fluid is very viscous. The Reynolds number is the ratio of the inertial force to the shearing force of the fluid: how fast the fluid is moving relative to how viscous it is, irrespective of the scale of the fluid system. The dimensionless Reynolds number is an important parameter in the equations that describe whether fully developed flow conditions lead to laminar or turbulent flow. The type of flow occurring in a fluid in a channel is important in fluid-dynamics problems and subsequently affects heat and mass transfer in fluid systems. An object moving through a fluid experiences a drag force in the direction opposite to its motion. Relationship with the Reynolds number Ī sphere in Stokes flow, at very low Reynolds number. In non-scientific terms, laminar flow is smooth, while turbulent flow is rough. Turbulent flow is a less orderly flow regime that is characterized by eddies or small packets of fluid particles, which result in lateral mixing. The threshold velocity is determined by a dimensionless parameter characterizing the flow called the Reynolds number, which also depends on the viscosity and density of the fluid and dimensions of the channel.

Laminar flow occurs at lower velocities, below a threshold at which the flow becomes turbulent. When a fluid is flowing through a closed channel such as a pipe or between two flat plates, either of two types of flow may occur depending on the velocity and viscosity of the fluid: laminar flow or turbulent flow. Laminar flow is a flow regime characterized by high momentum diffusion and low momentum convection. In laminar flow, the motion of the particles of the fluid is very orderly with particles close to a solid surface moving in straight lines parallel to that surface. There are no cross-currents perpendicular to the direction of flow, nor eddies or swirls of fluids. At low velocities, the fluid tends to flow without lateral mixing, and adjacent layers slide past one another like playing cards. In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing. This flow profile of a fluid in a pipe shows that the fluid acts in layers that slide over one another. The velocity profile associated with laminar flow resembles a deck of cards.

Laminar flow water cannon